Care

Avoid all use of abrasive, solvent-based or cream cleaners.

Ensure that no hot objects, such as saucepans to come in contact with the surface finish.

Kitchen Cabinet Doors can easily be cleaned using warm soapy water and a soft cloth or sponge. A soft nailbrush may be useful for hard to reach areas. Towel dry afterwards with a microfibre.

Stubborn stains and marks (such as ink) should be removed as soon as possible by gently wiping the surface with mentholated spirits.

NOTE. The use of such abrasive cleaners must not be used; as such methods can prematurely wear away the surface of the doors.

Use a dry micro-fibre cloth to remove the finger marks, take care not to over polish the surface in a single spot.

A touch up kit can be provided on request at a charge. The kit contains the coating colour, hardener, mixing tub, solvent bottle with small brush. Instructions for use are contained within the kit.

Use a non-abrasive spray and wipe to remove the substances before fully drying, take care not to over polish the surface in a single spot. Allow the residual smear to dry, then use a dry micro-fibre cloth to remove the smear.

Same approach as with the 2pac or Laminated finishes, remove grease with warm soapy water and a soft cloth or sponge. A soft nailbrush may be useful for hard to reach areas. Towel dry afterwards with a microfibre.

Regular cleaning recommended with a readily available product such as ‘Gumption’ to maintain the crisp new look to the benchtop. Always avoid the placement of hot cooking pots, pans, dishes directly onto the Stone surface, as cracking potentially can occur to the Stone surface.

Clean in the same manner as 2pac and Laminate surfaces. Always avoid scouring type methods and cleaners that have the potential to scuff the surface, and avoid the placement of hot cooking pots, pans, dishes directly onto the Laminate surface, as burning/scoring potentially can occur to the Laminate surface.